Quality Control Inspector Mechanical - Painting and Coating
Location: Qatar Onshore - Mesaieed
Contract Type: Contract role till 31/03/2031
Job Title
Quality Control Inspector Mechanical - Painting and Coating
Working Location
Qatar Onshore - Mesaieed
Qualification
- Mechanical, Metallurgical, Materials, or equivalent Engineering degree, technical diploma and/or 15+ years experience in Quality Control within a multi-disciplined construction environment
- Formal training in QC and membership with an internationally recognized chartered or other professional institution is preferred
- BGAS Grade 2 / NACE Level 2 Painting Inspector certification or equivalent is mandatory
- Preferably CSWIP 3.2 / AWS-SCWI Senior Welding Inspector and ASNT NDT Level II certification
- Other equivalent certifications from internationally recognized organizations can be reviewed and may be accepted
Experience
- Minimum 10 years of experience for Bachelor's degree holders or 15 years for Diploma holders in QA/QC inspection in painting, coating, corrosion protection, and preservation activities within Oil and Gas, Petrochemical, or Industrial construction
- GCC experience is preferred
- Hands-on experience inspecting protective coating systems for piping, tanks, structural steel, static equipment, and rotating equipment
- Strong knowledge of surface preparation, coating application, insulation interfaces, fireproofing systems, and coating inspection techniques
- Familiarity with international coating standards and inspection requirements, including NACE/AMPP, SSPC, ISO, ASTM, and client specifications
- Ability to work effectively with contractors, inspectors, and stakeholders in a multidisciplinary, multicultural environment
Primary Duties and Responsibilities
- Perform inspection and surveillance activities for painting, coating, and corrosion protection
- Verify surface preparation activities, including abrasive blasting, cleanliness, surface profile measurements, soluble salt testing, and environmental condition monitoring prior to coating application
- Conduct inspections of external and internal coating systems for pipelines, piping, structural steel, tanks, vessels, and process equipment throughout all stages of construction and installation
- Witness and monitor coating application activities, ensuring proper application of primer, intermediate, and finish coats in accordance with approved coating procedures and manufacturer recommendations
- Perform and witness coating quality control tests, including Wet Film Thickness (WFT), Dry Film Thickness (DFT), adhesion testing, holiday detection testing, hardness testing, and visual inspections to verify coating integrity and compliance
- Carry out holiday testing of coated surfaces, internal linings, and pipeline coating systems using approved methods and calibrated equipment to ensure coating continuity and defect-free application
- Inspect hot and cold insulation systems for piping, equipment, and vessels, including verification of insulation materials, vapor barriers, cladding installation, weatherproofing, and insulation-coating interfaces
- Perform inspections of Passive Fire Protection (PFP) and fireproofing systems, including material verification, surface preparation, thickness measurements, reinforcement installation, curing requirements, and final acceptance inspections
- Witness and evaluate Procedure Qualification Testing (PQT) and coating qualification trials to validate coating system performance and compliance with client requirements
- Review and verify coating, insulation, and fireproofing procedures, method statements, inspection and test plans (ITPs), and quality control documents for compliance with contractual and technical specifications
- Conduct material receiving inspections and verify that coating, insulation, and fireproofing materials are approved, properly stored, within shelf-life limitations, and supported by valid certificates and manufacturer documentation
- Participate in painting, coating, insulation, and fireproofing subcontractor prequalification audits, assessing technical capabilities, personnel qualifications, quality management systems, equipment availability, and past performance
- Coordinate inspection activities with contractors, subcontractors, third-party inspectors, and client representatives to ensure timely execution of inspection and testing requirements
- Review and validate inspection reports, test records, calibration certificates, material certificates, and quality dossiers to ensure completeness and compliance with requirements
- Identify, document, and report non-conformities, monitor corrective actions, and verify satisfactory close-out of quality issues
- Ensure all inspection, testing, and monitoring equipment are calibrated, maintained, and suitable for intended use
- Maintain accurate inspection records and support implementation of the Quality Management System, applicable industry standards, and HSE requirements throughout project execution
Location: Qatar Onshore - Mesaieed
Contract Type: Contract role till 31/03/2031
Job Title
Quality Control Inspector Mechanical - Painting and Coating
Working Location
Qatar Onshore - Mesaieed
Qualification
- Mechanical, Metallurgical, Materials, or equivalent Engineering degree, technical diploma and/or 15+ years experience in Quality Control within a multi-disciplined construction environment
- Formal training in QC and membership with an internationally recognized chartered or other professional institution is preferred
- BGAS Grade 2 / NACE Level 2 Painting Inspector certification or equivalent is mandatory
- Preferably CSWIP 3.2 / AWS-SCWI Senior Welding Inspector and ASNT NDT Level II certification
- Other equivalent certifications from internationally recognized organizations can be reviewed and may be accepted
Experience
- Minimum 10 years of experience for Bachelor's degree holders or 15 years for Diploma holders in QA/QC inspection in painting, coating, corrosion protection, and preservation activities within Oil and Gas, Petrochemical, or Industrial construction
- GCC experience is preferred
- Hands-on experience inspecting protective coating systems for piping, tanks, structural steel, static equipment, and rotating equipment
- Strong knowledge of surface preparation, coating application, insulation interfaces, fireproofing systems, and coating inspection techniques
- Familiarity with international coating standards and inspection requirements, including NACE/AMPP, SSPC, ISO, ASTM, and client specifications
- Ability to work effectively with contractors, inspectors, and stakeholders in a multidisciplinary, multicultural environment
Primary Duties and Responsibilities
- Perform inspection and surveillance activities for painting, coating, and corrosion protection
- Verify surface preparation activities, including abrasive blasting, cleanliness, surface profile measurements, soluble salt testing, and environmental condition monitoring prior to coating application
- Conduct inspections of external and internal coating systems for pipelines, piping, structural steel, tanks, vessels, and process equipment throughout all stages of construction and installation
- Witness and monitor coating application activities, ensuring proper application of primer, intermediate, and finish coats in accordance with approved coating procedures and manufacturer recommendations
- Perform and witness coating quality control tests, including Wet Film Thickness (WFT), Dry Film Thickness (DFT), adhesion testing, holiday detection testing, hardness testing, and visual inspections to verify coating integrity and compliance
- Carry out holiday testing of coated surfaces, internal linings, and pipeline coating systems using approved methods and calibrated equipment to ensure coating continuity and defect-free application
- Inspect hot and cold insulation systems for piping, equipment, and vessels, including verification of insulation materials, vapor barriers, cladding installation, weatherproofing, and insulation-coating interfaces
- Perform inspections of Passive Fire Protection (PFP) and fireproofing systems, including material verification, surface preparation, thickness measurements, reinforcement installation, curing requirements, and final acceptance inspections
- Witness and evaluate Procedure Qualification Testing (PQT) and coating qualification trials to validate coating system performance and compliance with client requirements
- Review and verify coating, insulation, and fireproofing procedures, method statements, inspection and test plans (ITPs), and quality control documents for compliance with contractual and technical specifications
- Conduct material receiving inspections and verify that coating, insulation, and fireproofing materials are approved, properly stored, within shelf-life limitations, and supported by valid certificates and manufacturer documentation
- Participate in painting, coating, insulation, and fireproofing subcontractor prequalification audits, assessing technical capabilities, personnel qualifications, quality management systems, equipment availability, and past performance
- Coordinate inspection activities with contractors, subcontractors, third-party inspectors, and client representatives to ensure timely execution of inspection and testing requirements
- Review and validate inspection reports, test records, calibration certificates, material certificates, and quality dossiers to ensure completeness and compliance with requirements
- Identify, document, and report non-conformities, monitor corrective actions, and verify satisfactory close-out of quality issues
- Ensure all inspection, testing, and monitoring equipment are calibrated, maintained, and suitable for intended use
- Maintain accurate inspection records and support implementation of the Quality Management System, applicable industry standards, and HSE requirements throughout project execution